Home / Our Products / Power

Static Transfer System (STS)

STATYS Series

Intelligent STS solutions that operate automatically when a power outage occurs in order to ensure permanent power availability.

STATYS Cabinet

Static Transfer System (STS): ensuring optimal redundancy for critical loads – from 200 to 1600 A (1800 A catcher).
Built with advanced STS technology, designed to guarantee optimal redundancy and uninterrupted power, STATYS Cabinet is an intelligent static transfer system (STS). This advanced system provides increased supply availability, automatically transferring its loads to alternative power sources when the primary source falls out of set values.

STATYS Cabinet offers the highest protection against main power source outages, failure in the upstream power distribution system, malfunctions due to defective devices, or operator errors.

Strengths
  • Best resiliency for optimal power availability
  • Advanced Transformer Switching Management (ATSM)
  • Designed to fit your installation
  • 35 years of innovation driven by the field
Conformity to standards
  • IEC 62310 – 1
  • IEC 62310 – 2
  • IEC 60529
  • CE
  • UKCA

STATYS Chassis

Integrable Static Transfer System (STS) for easy and seamless panel integration - from 200 to 1800 A.
Engineered for seamless integration into distribution panels, ensuring easy installation and enhanced power continuity, STATYS Chassis is a Static Transfer System (STS) that provides protection against power source outage, failures in the upstream power distribution system or human errors.
Supplied by two independent alternate sources, it significantly increases the reliability of the electrical infrastructure and saves you both time and effort during integration.

Developed for seamless installation in Distribution Panels/PDUs, it comes in two design options:

  • Chassis frame up to 630 A.
  • Standalone chassis from 800 A.
Strengths
  • Pre-engineered form factor for seamless integration
  • Advanced Transformer Switching Management (ATSM)
  • Best in class power availability integrated in your equipment
  • 35 Years of Field-Driven Innovation
Conformity to standards
  • IEC 62310 – 1
  • IEC 62310 – 2
  • IEC 60529
  • CE
  • UKCA

STATYS Rack

Static Transfer Switch (STS): Providing optimal redundancy directly into your rack – from 32 to 100 A.
Designed to bring redundant power to any equipment, STATYS Rack is an intelligent Static Transfer Switch (STS) built to increase power supply availability by seamlessly transferring the load to a redundant source.

In Data Centres, STATYS Rack makes use of the dual feed capability of your structure allowing single-corded loads to access redundant power. In industry, healthcare, infrastructure and other applications, STATYS Rack enhances availability of critical loads by bringing redundant power to any equipment.

Strengths
  • Advanced redundancy for optimal power availability
  • 35 years of innovation driven by the field
  • More flexibility for various applications
  • Advanced Transformer Switching Management (ATSM)
Conformity to standards
  • IEC 62310 – 1
  • IEC 62310 – 2
  • IEC 60529
  • CE
  • UKCA

Technical Data

STATYS 19" rack - hot swap -1ph 19’’ rack - hot swap -3ph Cabinet - integrable chassis (OEM)
Rating [A] 32 63 63 100 200 300 400 600 800 1000 1250 1400 1600 1800
ELECTRICAL SPECIFICATIONS
Rated voltage 120-127/220
240 / 254 V		 208-220 / 380-415 / 440 V
Voltage tolerance ± 10% (configurable)
Non-synchronized sources management configurable up to +/- 180
Frequency 50 Hz or 60 Hz (± 5 Hz – configurable)
Number of phases ph+N or ph-ph (+ PE) 3ph+N or 3ph (+ PE)
Number of poles switching 2-pole switching 3 or 4-pole switching
Maintenance bypass (cabinet version) interlocked and secured
Overload 150 % for 2 minutes - 110 % for 60 minutes
Efficiency 99 %
Admissible power factor no restrictions
ENVIRONMENT
Operating ambient temperature 0-40 °C
Relative humidity 95%
Maximum altitude 1000 m a.s.l. without derating
Acoustic level at 1 m (ISO 3746) <45 dBA ≤ 60 dBA ≤ 84 dBA
STANDARDS
Safety IEC 62310, IEC 60529, AS 62310, AS 60529
EMC C2 category (IEC 62310-2, AS 62310.2)
Product declaration CE, RCM (E2376)

 

Dimensions
Model Range (A) Width (mm) Depth (mm) Height (mm)
1 phase 19” Rack 32 - 63 483 (19”) 747 89 (2U)
3 phases 63 - 100 483 (19”) 648 400 (9U)
Integrable Chassis (OEM 200 400 586 765
300 - 400 600 586 765
600 800 586 765
800 - 1000 1000 950(1) 1930
1250 - 1800 910 815 1955
Cabinet 200 500 600(1) 1930
300 - 400 700 600(1) 1930
600 900 600(1) 1930
800 - 1000 1400 950(1) 1930
1250 - 1600 2010 815 1955

 

(1) Depth does not include handles (+40 mm)
Download PDF


Access our Download Centre to find out more  >>

We’re here to help

Our technical experts are on hand to answer any questions on installation,
commissioning, maintenance, product selection and software updates.
Contact Us