Modulys XL

The ultimate modularity for the most critical environments – from 200 to 4800 kVA/kW

The MODULYS XL is engineered for resilience. Based on 200 kW power modules, the power of a single UPS unit can be increased up to 1200 kW, while the system can include up to 4 units in parallel. Its innovative concept allows for the constant protection of the load in online mode, making response to load growth and managing all aspects of the system’s life cycle, secure and impressively rapid.

Associated with a variety of adapted Services, the MODULYS XL provides unprecedented availability and flexibility to fulfil the requirements of today’s highly critical applications.

Strengths

3 standard bricks for your very own system
5-minute plug-in
Safe and easy deployment
Concurrent and risk-free maintenance

Conformity to standards

IEC/EN 62040-1, IEC/EN 62040-2, IEC/EN 62040-3, IEC/EN 62040-4
CE
EAC

Advantages

3 standard bricks for your very own system

UPS configurations based on 3 standard bricks for a simplified installation process.
Repeatable and standardised assets to meet different configuration and architectural requirements.
An adjustable number of empty power slots to match different scalability and redundancy needs.
Complete UPS customisation without modifying the core standardised bricks.
Quality, simplicity of construction and ease of operation.

5-minute plug-in

Power module addition or removal in only 5 minutes by one person.
Simple and safe power module plug-in: no power or communication bus cabling required.
Load fully protected in double conversion mode during the power extension or module swap.
Hot-scale and swap process in incremental steps of 200 kW to reduce time and optimise costs.
Automatic power module self-configuration and testing before connection.
Firmware auto-alignment.
No installation rework when a new capacity is required.
Off-powered connection of the power module to prevent electrical arcing upon plug-in and plug-out.

Safe and easy deployment

Specifically engineered to eliminate unexpected installation errors.
Easy power slot positioning and perfect alignment including on uneven floors.
Power slots with pre-engineered built-in bus bars for quick, easy and clean interconnections.
A full frontal access installation so the UPS can be installed against a wall.
The power slots set up during the installation stage are ready for future hot plug-in power modules.
Safe and easy power module handling.
Full system heat-run test capability during commissioning without the need for an external load bench.

Concurrent and risk-free maintenance

Concurrent maintenance of all components.
Safe power module maintenance – outside of the running system.
Both the power modules and the static bypass can be maintained while the load remains fully protected in double conversion mode.
No in-situ maintenance, service or repair that may jeopardise the running system.
Fully extractable power modules and sub-assemblies and complete access to all components, reducing the mean time to repair (MTTR).
Built-in means to perform an exhaustive pre-test after the module’s maintenance.

Technical Data

UPS Unit
Power Module rated power	200kVA/kW
Unit rated power	200 to 1200kVA/kW
Number of Power Modules	1 to 6
Number of Power Slots	1 to 6
Number of Units per System	up to 4 units in parallel
Redundant configuration	N+x

Rectifier input
Voltage	400V 3ph (200 to 480V⁽¹⁾)
Frequency	50/60Hz ±5Hz
Power factor/THDI	>0.99/<2.5%⁽²⁾

Output
Power factor	1 (according to IEC/EN 62040-3)
Voltage	400V 3ph+N (380/415V configurable)
Frequency	50/60Hz (configurable) ±0.01Hz - free-running
Voltage distortion (Ph/Ph)	ThdU ≤1.5% (linear load)

Bypass
Voltage	rated output voltage ±15% (configurable)
Frequency	rated output frequency ±5Hz (configurable for Genset compatibility)

Power hub
Dimensions W x D x H (mm)	1200 x 975 x 2120
Weight (kg)	750

Power slot
Dimensions W x D x H (mm)	550 x 975 x 2120
Weight (kg)	130

Power module
Dimensions W x D x H (mm)	500 x 950 x 1940
Weight (kg)	450
Type	Hot plug-in / Hot-swappable
MTBF	1,000,000hrs
Online efficiency (double conversion mode)	up to 97%

Environment
Operating ambient temperature	from 0°C to +40°C
Relative humidity	0-95% without condensation
Maximum altitude	1000m without derating
Acoustic level at 1m	<75dBA
Short-circuit withstanding (Icw)	100kA - Symmetrical

Standards
Safety	IEC/EN 62040-1
EMC	IEC/EN 62040-2
Performance	IEC/EN 62040-3
Environmental	IEC/EN 62040-4
Product declaration	CE, EAC

(1) Conditions apply.
(2) At full rated voltage; with input THDV <1%.

System

Electrical options

Input, output and maintenance bypass switches.
3-wire bypass and output distribution kit.
PEN kit for TN-C grounding system.
4-wire rectifier (neutral connection kit).
Shared batteries (1, 2 or 3 per unit).
Enhanced battery charger.
Battery tripping kit.
Unit parallelisation kit.
Redundant electronic power supplies.
BCR (Battery Capacity Re-injection).
ACS synchronisation system.
Cold start.
Top roof.

Communication

Standard communication features

User-friendly 7” touch-screen multilingual colour graphic display (Power Hub).
Tri-colour display with a number indicating the Power Module status (Power Slot).
2 slots for communication options.
USB port to download the UPS reports and log files.
Ethernet port for service purposes.

Communication options

Dry-contact interface (configurable, voltage-free contacts).
MODBUS RTU RS485 or MODBUS TCP.
PROFIBUS / PROFINET gateway.
BACnet/IP interface.
NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
REMOTE VIEW PRO supervision software.
IoT gateway for Socomec cloud services and the SOLIVE UPS mobile app.
Remote touch-screen panel.
Additional Com-slot extension.

Download PDF

Access our Download Centre to find out more >>