Modulys RM GP

Rack-mounted modular UPS system with capabilities for protecting critical loads – from 25 to 75 kVA/kW

MODULYS RM GP is a 3-phase modular UPS system designed for 19” rack integration.
Easy to integrate and install while being simple to manage and maintain, it provides maximum availability and power protection in a compact design leaving free space for other rack-mounted devices.

Strengths
  • Full rack integration
  • Overall cost optimisation
  • Totally redundant design
  • Automatic firmware alignment
  • Enhanced serviceability performance
  • ‘Forever Young’ concept
Conformity to standards
  • EN 62040-1, EN 60950-1, EN 62040-2, EN 62040-3 (VFI-SS-111)
  • CE
  • RCM (E2376)
  • EAC

Advantages

Full rack integration
  • Designed for easy and no-risk integration in 19” rack cabinets.
  • Total compatibility with any 19” standard rack cabinet.
  • High power density.
  • Easy to manage, integrate and customise.
  • Flexible simplified cabling.
Overall cost optimisation
  • Time saving integration process.
  • No risk of cost and budget overruns.
  • Compact solution, saving valuable space.
  • Simplified logistics.
  • Easy integration: avoids costly set-up and reworking.
Totally redundant design
  • N+1 redundancy level.
  • Designed for no single point of failure.
  • No centralised parallel control.
  • Totally independent power modules.
Automatic firmware alignment
  • Without human intervention.
  • Completely risk-free.
  • Load protected in inverter mode.
Enhanced serviceability performance
  • Power module automatic firmware alignment.
  • Fast & safe maintenance based on hot swap parts (power modules, bypass, electronic boards, batteries).
  • Ready for concurrent maintenance.
  • Load fully protected in double conversion mode (VFI) during power module replacement.
  • 3-colour LED bar for quick and easy detection of the power module status.
  • Battery can be hot-swapped without shutting down the connected equipment.
  • Totally front access operation.
‘Forever Young’ concept
  • Exclusive life cycle extension programme.
  • Eliminates end-of-life criticality.
  • Based on an electronics-free sub-rack enclosure + a set of plug-in parts.
  • Module compatibility guaranteed for 20+ years.
  • Allows for the implementation of future module technology.
  • Company declaration of 20-year compatibility.

Technical Data

  MODULYS RM GP
Model 9U 15U
Number of power modules  1 to 2 x 25kW  1 to 4 x 25kW
Configuration  N, N+1 redundant
Power [Sn] 25 to 50kVA  25 to 75kVA
Power [Pn] 25 to 50kW  25 to 75kW
Input/output  3/3

 

Input
Model 9U 15U
Voltage  400V 3ph (340V to 480V)
Frequency  50/60Hz ±10%
Power factor / THDI  >0.99/<3%

 

Output
Model 9U 15U
Voltage  380/400/415V ±1% 3ph+N
Frequency  50/60Hz ±0.1%
Voltage distortion  <1% (linear load), <4% (non-linear load according to lEC 62040-3)
Short-circuit current  up to 3 x In
Overload  125% for 10 minutes, 150% for 1 minute
Crest factor 3:1

 

Hot-swap bypass
Model 9U 15U
Voltage Rated output voltage ±15% (configurable from 10% to 20%)
Frequency 50/60Hz ±2% (configurable for GenSet compatibility)
Weight (kg) 7 7.5

 

Efficiency (TÜV SÜD verified)
Model 9U 15U
Online double conversion mode  up to 96.5%

 

Environment
Model 9U 15U
Ambient temperature 0°C to 40°C (15 to 25°C for maximum battery life)
Relative humidity 0 to 95% without condensation 
Maximum altitude  1000m without derating (3000m max)
Acoustic level at 1m  <53dBA

 

UPS rack
Model 9U 15U
Dimensions W x D x H 442mm x 920mm x 9U 442mm x 920mm x 15U
Weight (empty cabinet) (kg) 36 42
Degree of protection IP20

 

Hot-swap power module
Model 9U 15U
Height  3U
Weight (kg) 34
Type  Hot plug-in / Hot-swappable
MTBF >1000000 hours (calculated and verified)

 

Hot-swap battery rack
Model 9U 15U
Type Acid leak-proof - Long Life batteries
Protection Independent protection for each battery string
Dimensions W x D x H  442mm x 890mm x 4U
Weight (empty rack) (kg) 15

 

Standards
Model 9U 15U
Safety  IEC/EN 62040-1      
EMC  IEC/EN 62040-2 Class C2
Performance  IEC/EN 62040-3    
Product certification  CE

System

Electrical options
  • 19” 4U battery rack.
  • External battery cabinet.
  • High capacity battery charger.

Communication

Software features
  • User-friendly 7” touch-screen multilingual colour graphic display.
  • 2 slots for communication options.
  • USB port to download UPS report and log file.
  • Ethernet port for service purpose.
  • Commissioning wizard.
Communication options
  • Dry-contact interface (configurable voltage-free contacts).
  • MODBUS RTU RS485 or MODBUS TCP.
  • BACnet/IP interface.
  • NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
  • REMOTE VIEW PRO supervision software.
  • IoT gateway for Socomec cloud services and SoLive UPS mobile app.
  • Remote touch-screen panel.
Download PDF


Access our Download Centre to find out more  >>

We’re here to help

Our technical experts are on hand to answer any questions on installation,
commissioning, maintenance, product selection and software updates.
Contact Us