Home / Our Products / Power

Active Power Filter (APF)

Enersine Monolithic

Maximum active harmonics and power factor compensation – from 30 to 100A

Ablerex Enersine Monolithic from CSPM offers the lowest installation and operating costs with maximum performance and expected battery life, providing the most economical and effective solution.

Perfect for:

Data centres

Large batteries installations

Critical buildings

Monitoring

Airports

Motor drive systems

Features

Active energy filters with monolithic structure are the most economical and effective solutions to compensate for power factor and harmonic distortions from loads.
Versatile due to its high current rating and parallel connection capability.
Maximum performance with 3-level DSP technology.
Space optimisation through compact design with high power density.
Multi-purpose: one model covers all three-phase systems (3-wire or 4-wire).
Compensation of all harmonics (up to the 51st) with response time of less than 1 ms.
No overload effect.
Selective mode that allows you to select the harmonics to be compensated.
Phase balancing of three-phase loads.
Possibility of installation in open or closed loop.
All parameters are under control via the 7-inch colour (2.7-inch LCD for 30 A model) touch screen display that shows: voltage and current waveforms, frequency spectrum, parameters and events.
Events and parameters can be downloaded to a removable SD card.
Advanced communication: Dry contacts (1 In and 3 Out) input, USB, RS485 ModBus, RJ45 Ethernet, e-mail alarm settable.
Ability to select multiple languages.

Technical data

MODEL		ENERSINE 30	ENERSINE 60	ENERSINE 80	ENERSINE 100
SIZE (A)		30	60	80	100
ELECTRICAL SPECIFICATIONS	Rated voltage	400 V +15%, -20%; 480V +10%, -20%
	Phases	Three-phase
	Frequency	50/60 ±3 Hz
	Harmonic correction	From the 2nd to the 51st
	Power factor correction	Capacitive and inductive (selectable)
	Load balancing	Between two phases and between phase and neutral
	Response time	25 μs
ENVIRONMENTAL PARAMETERS	Operating temperature	-10°C to +40°C with no derating *
	Relative humidity	<95%
	Altitude (a.s.l.)	<1000 m with no derating, >1000 m with 1% derating for every 100 m
	Audible noise at 1 m.	<55 dBA	<63 dBA
GENERAL	Dimensions (WxDxH) mm	348x164x598	500x286x775
	Weight (kg)	16	51	58	60
	Protection class	IP30/IP31
	Connections	4-wire/3-wire
	Installation	Wall mounting
	Type	Monolithic
	Parallel connection up to (A)	120	240	320	400
	Max. parallel modules	4
	TA configuration	Source side TA: closed loop control - load side TA: open loop control
CONNECTIVITY	Built-in communication ports	USB, RS-485 ModBus RTU, EPO and Dry contact board (1 input – 3 output)	USB, RS-485 ModBus RTU, EPO, Ethernet and Dry contact board (1 input – 3 output)
	User interface	Colour 2,7” LCD screen display	Colour 7” LCD touch screen display
	Software	Data monitoring and storage software
REGULATIONS	Standards	EN61000-6-4, EN55011, CISPR 11, IEC 61000-3-12, IEC 61000-3-11
		IEC 61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4
		IEC 61000-4-5, IEC 61000-4-6, IEC 62477-1, EN 61000-4-8, EN61000-4-34
	Marking	CE, UKCA

* Enersine 30 model: -10°C to +25°C without derating, above +25°C automatic derating to 20A

Download PDF