Home / Our Products / Power

Active Power Filter (APF)

Enersine Modular

Maximum performance and versatility for any load size – from 400 to 600A

Ablerex Active Power Filter (APF) with modular topology from CSPM is the ideal solution to compensate for variable power factor and harmonics. With high current ratings from 400 to 600A it can be adapted to any load size for maximum versatility of use.

Perfect for:

Medical

Industry

Highly polluting loads

CNC machines

Airports

Motor drive systems

Features

The scalability of the Modular structure protects your investment over time.
The power modules are easy to install and are hot swappable: they can be replaced while the filter is operating.
Versatile thanks to the modularity, high nominal current and possibility of parallel connection up to 400 A for the wall version, and up to 2400 A for the modular version.
Enersine is available in two versions, 4 or 6 modules for 60 A, 80 A or 100 A, which can also be used in a mixed configuration within the same system.
Maximum performance with 3-level DSP technology.
Compact, high-power-density design that optimises space.
Multi-purpose: one model covers all three-phase systems (3-wire or 4-wire).
Correction of all harmonics up to the 51st (up to the 25th for 30 A) with a response time of less than 1 ms.
No overload effect.
Selective mode allows the selection of harmonics to be corrected.
Phase balancing of three-phase loads.
Open loop or closed loop installation.
A single control module manages up to 8 power modules.
All parameters are under control via the 7-inch colour (2.7-inch LCD for 30 A model) touch screen display that shows: voltage and current waveforms, frequency spectrum, parameters and events.
Events and parameters can be downloaded to a removable SD card.
Advanced communication: dry contacts (3 in and 1 out), USB, RS485 Modbus, RJ45 Ethernet, programmable email alarm.

Technical data

MODEL		ENERSINE 400	ENERSINE 600
SIZE (A)		400	600
POWER MODULE (A)		60-80-100
ELECTRICAL SPECIFICATIONS	Rated voltage	400 V +15%, -20%; 480V +10%, -20%
	Phases	Three-phase
	Frequency	50/60 ±3 Hz
	Harmonic correction	From the 2nd to the 51st
	Power factor correction	Capacitive and inductive (selectable)
	Load balancing	Between two phases and between phase and neutral
	Response time	25 μs
ENVIRONMENTAL PARAMETERS	Operating temperature	-10°C to +40°C with no derating
	Relative humidity	<95%
	Altitude (a.s.l.)	<1000 m with no derating, >1000 m with 1% derating for every 100 m
	Audible noise at 1 m.	<63 dBA
GENERAL	Dimensions (WxDxH) mm	600x900x1500	600x900x1950
	Weight (kg)*	150	196
	Protection class	IP21
	Connections	4-wire/3-wire
	Installation	Floor standing
	Type	Modular
	Parallel connection up to (A)	2400
	Max. no. of modules per system (60 or 80 A in a mixed configuration)	Up to 4	Up to 6
	Max. parallel systems	6	4
	TA configuration	Source side TA: closed loop control - load side TA: open loop control
CONNECTIVITY	Built-in communication ports	USB, RS485, Modbus RTU, EPO Ethernet port and dry relay contacts (1 in/3 out)
	User interface	7’’ colour LCD touch screen display
	Software	Data monitoring and storage software
REGULATIONS	Standards	EN61000-3-4, IEEE 519-1992, EN60146, EN50178; UL508, EN61000-6-4, EN55011, CISPR 11, IEC 61000-3-12, IEC 61000-3-11, IEC 61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 62477-1, IEC 61000-4-5, IEC 61000-4-6, EN 61000-4-8, EN61000-4-34
REGULATIONS	Marking	CE, UKCA

* Weight without the control module and power modules

Download PDF