Delphys XL

High-powered and compact in size, with outstanding resiliency – 1000 and 1200 kVA/kW

Delphys XL is a highly compact UPS with best-in-class efficiency offering inherent redundancy and allowing by design, fast & safe maintenance operation. This fully resilient UPS architecture helps eliminate traditional single points of failure.

Strengths

Flexible integration with an optimised footprint
Unmatched resiliency to maximise availability
Best-in-class energy management & savings
Critical chain interoperability
Easy and safe maintenance supporting low MTTR

Conformity to standards

EN/IEC 62040-1
EN/IEC 62040-2
EN/IEC 62040-3
EN/IEC 62040-4

Advantages

Flexible integration with an optimised footprint

High-powered UPS with a compact and optimised design.
Highly flexible connection to your electrical environment.
Easy and fast deployment of the entire UPS system.
Up to 70% space saving when combined with lithium-ion batteries.
Advanced on-site testing features to certify commissioning.

Best in class energy management & savings

99.1% efficiency with our Smart Conversion Mode.
97.1% Voltage and Frequency Independent (VFI) mode as standard.
ENERGY SAVER for higher system efficiency under low load conditions (bricks in hot stand-by).
Multiple advanced operating and testing modes to minimise total cost ownership (TCO).
Ready for grid support functionalities.

Critical chain interoperability

Designed to fit any data centre power distribution architecture.
Advanced functionalities to ensure Genset stability upon restart or significant variation in loads.
Designed to coordinate perfectly with our downstream connected Static Transfer Systems (STS).
Supports even the most challenging load variation.

Unmatched resiliency to maximise availability

UPS architecture eliminates single point of failure related to traditional monolithic UPS.
Fault tolerant concept provides double conversion mode redundancy up to 80% of the rated power.
Self-sufficient power bricks with advanced selective disconnection.
Based on our field-proven, high-powered XL platform.
Limited number of power converters – each designed to eliminate potential fault propagation for best Mean Time Between Failures (MTBF).
Powerful and robust static bypass.

Easy and safe maintenance supporting low MTTR

Reduced Mean Time To Repair (MTTR) supported by cold-extractible power bricks.
No cabling operation required to slide-out a power brick.
Front access to all components.
Safe servicing thanks to “hands outside” maintenance.
Maintenance station with embedded operating power brick as a spare.
Option to test the UPS and batteries without load when carrying out maintenance activities

Technical Data

General characteristics
UPS power rating (35 °C)	1000 kVA/kW	1200 kVA/kW
Efficiency in Double Conversion Mode	Up to 97.1% - certified by third party (TÜV)
Efficiency in Smart Conversion Mode	Up to 99.1% - certified by third party (TÜV)
Parallel capability	Up to 4 units

Input
UPS power rating (35 °C)	1 000 kVA/kW	1 200 kVA/kW
Nominal input voltage	380 / 400 / 415V - 3Ph or 3Ph+N
Input voltage tolerance	200 to 480V
Input connection	Common or separated / top or bottom
Frequency range	50/60Hz ± 10%
Input power factor / THDi	> 0.99 / < 1.5% @ full load
Power walk-in on Genset	Linear ramp - from 1A/sec to 1000A/sec

Output
UPS power rating (35 °C)	1 000 kVA/kW	1 200 kVA/kW
Nominal output voltage	380 / 400 / 415V - 3Ph or 3Ph+N
Frequency range	50/60Hz ± 0.01% (free running)
Voltage regulation	± 1% steady state
Output voltage distortion (THDv)	< 1%
Output voltage performance (load variation 0 - 100%)	Complies with IEC 62040-3 Class 1 (VFI-SS-111)
Inverter overload capability	110% 1h / 125% 10 min / 144% 1 min	110% 1h / 125% 10 min / 150% 1 min
Bypass overload capability	110% continuous / 125% 10 min / 150% 1 min
Inverter short circuit capability	Up to 3230A	Up to 4090A
Bypass short circuit selectivity	Fuseless architecture (I_cw 65kA)

Batteries
UPS power rating (35 °C)	1 000 kVA/kW	1 200 kVA/kW
Battery type - 2 wires (+/-)	VRLA / Lithium-ion
Battery voltage range	Up to 705V
Battery connection capability	Up to 10 strings (w/o extra cabinet)
Lithium-ion communication	Modbus TCP / dry contact

Environment
UPS power rating (35 °C)	1 000 kVA/kW	1 200 kVA/kW
Operating temperature	0 - 40°C
Humidity	0 - 95% without condensation
Air flow	From front to top
Maximum altitude without derating	1000m (3,300 ft)
Standard protection rating	IP20 / IP21 (optional)
Seismic rating	Zone 2 / Zone 4 (optional)
Frame colour	RAL 7016

Compliance with standards
UPS power rating (35 °C)	1 000 kVA/kW	1 200 kVA/kW
Safety	IEC/EN 62040-1
EMC	IEC/EN 62040-2
Performance	IEC/EN 62040-3
Environmental	IEC/EN 62040-4

Dimensions and weight
UPS power rating (35 °C)	1 000 kVA/kW	1 200 kVA/kW
UPS dimensions (W x D x H)	2625 x 1000 x 2005 mm	3003 x 1000 x 2005 mm
Weight	2600 kg	3200 kg
Clearance	No rear or lateral clearance for installation and maintenance

System

Electrical options

Input, output and maintenance bypass switches.
PEN kit for TN-C grounding system.
Reinforced battery charger.
Battery protection tripping kit.
SMART CONVERSION mode.
BCR (Battery Capacity Re-injection).
ACS synchronisation system.
Cold start.
Maintenance Station with spare power conversion brick.
Advanced Genset Management.

Communication

Standard communication features

User-friendly 7” touch-screen multilingual colour graphic display.
USB port to download UPS reports and log files.
Ethernet port for service purposes.

Communication options

Dry-contact interface (configurable voltage-free contacts).
MODBUS RTU RS485 or TCP.
BACnet/IP interface.
NET VISION: professional WEB/SNMP Ethernet interface for secure UPS monitoring and remote automatic shutdown.
NET VISION EMD: Environment Temperature and Humidity sensor with 2 inputs.
Remote View Pro supervision software.
Remote touch-screen panel.

Download PDF

Access our Download Centre to find out more >>